Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Fiesta, Festiva and Ka

Reply
 
Thread Tools Display Modes
Old 20-04-2015, 06:33 PM   #1
excalibur1491
Regular Member
 
Join Date: Mar 2015
Posts: 36
Default Re: Noise in the engine

Quote:
Originally Posted by fiestaz View Post
Fuel consumption should have been an improvement unless it was very hilly? Might still be trying to adjust to the new fuel aswell.

Those revs in that gear is completely normal for these.. Its just how they operate. Nothing wrong with it. They are made to do it.
Thansk for the answer, that gives me a bit more peace of mind. I thought it really sounded like it wanted me to put the 6th gear which I obviously don't have..

The trip I made was same as before the service, same highway, barely any wind from the side (not in front) so it should've been better. I guess it could be adjusting to it, but it was almost twice as much as the first time (I was actually very happily surprised the first time I did that trip lol)


Thanks a lot!
Ill bring the car tomorrow to Ford, and hopefully this time they'll pay the attention it deserves, specially after what they charged me for the service....
excalibur1491 is offline   Reply With Quote Multi-Quote with this Post
Old 21-04-2015, 09:57 AM   #2
excalibur1491
Regular Member
 
Join Date: Mar 2015
Posts: 36
Default Re: Noise in the engine

So I just came back from Ford. the guy says its the PCV valve doing what its supposed to do. All normal.
I don't really trust the guy too much, because I saw other ford fiestas from carsales and gumtree and none did that...
But I'm getting tired of this, so maybe Ill just let it be, and in the next service I'll bring it somewhere else and ask... Does that seem reasonable? This is my first car you know.. lol

I'll try to look at the PCV valve myself if I'm able to find it.... TRAU BLAU mentioned its on top of the rocker-cover, now I just need to find the rocker-cover... lol

Quote:
Originally Posted by excalibur1491 View Post
Thansk for the answer, that gives me a bit more peace of mind. I thought it really sounded like it wanted me to put the 6th gear which I obviously don't have..

The trip I made was same as before the service, same highway, barely any wind from the side (not in front) so it should've been better. I guess it could be adjusting to it, but it was almost twice as much as the first time (I was actually very happily surprised the first time I did that trip lol)


Thanks a lot!
Ill bring the car tomorrow to Ford, and hopefully this time they'll pay the attention it deserves, specially after what they charged me for the service....

Last edited by excalibur1491; 21-04-2015 at 10:14 AM.
excalibur1491 is offline   Reply With Quote Multi-Quote with this Post
Old 21-04-2015, 02:24 PM   #3
TRAU BLAU
Regular Member
 
Join Date: Nov 2010
Location: Kuranda,Cairns
Posts: 388
Default Re: Noise in the engine

Quote:
Originally Posted by excalibur1491 View Post
So I just came back from Ford. the guy says its the PCV valve doing what its supposed to do. All normal.
I don't really trust the guy too much, because I saw other ford fiestas from carsales and gumtree and none did that...
But I'm getting tired of this, so maybe Ill just let it be, and in the next service I'll bring it somewhere else and ask... Does that seem reasonable? This is my first car you know.. lol

I'll try to look at the PCV valve myself if I'm able to find it.... TRAU BLAU mentioned its on top of the rocker-cover, now I just need to find the rocker-cover... lol
I don't know whether you're joking or what but the hose that comes out from the top of the engine goes down under the inlet pipes & enters the induction chamber via the T pipe.Have you cleaned out all the gunk inside the chamber & inside the rocker-cover.
__________________
Live and Let Live
TRAU BLAU is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 21-04-2015, 02:33 PM   #4
excalibur1491
Regular Member
 
Join Date: Mar 2015
Posts: 36
Default Re: Noise in the engine

Quote:
Originally Posted by TRAU BLAU View Post
I don't know whether you're joking or what but the hose that comes out from the top of the engine goes down under the inlet pipes & enters the induction chamber via the T pipe.Have you cleaned out all the gunk inside the chamber & inside the rocker-cover.
Haha, No I'm not joking. I'm sorry, but English is not my first language (just moved to Australia which also means I have no mechanic tools, I should by some) and I know nothing about cars. So really, all the car-related words that I know from watching F1 are not of any use as the translations are not trivial! Sorry about that

I haven't cleaned the engine, maybe I should. I'll try to look into it this evening if its not too dark when I get back.

Many thanks, again!
excalibur1491 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 05:47 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL