Wheel width advice needed (LS)

[c0n13oX]

Hi all,
New to the forum, ive got a 2005 LS zetec hatch and i am looking at upgrading the rims. Just wondering what sort of width i can go out to. Im currently looking at some 18x8.5s with a 40 offset. Is anyone running a similar setup?

[DZFord]

18 x 8 is OK, I'm not 100% on 18 x 8.5.
Your offset is OK though - recommended between 38 and 52 for the Focus if I recall correctly.

[c0n13oX]

xxr 527s focus.JPG

well im thinking if this guy can fit 18x8.75s i should be ok... but wheels are on the back burner now that my clutch has gone :/

[Franco Cozzo]

Talking about wheels does anyone know the size of 18" MA Mondeo wheels as I'm keen on a set when my current tyres wear out.

[dazFX]

Originally Posted by c0n13oX

well im thinking if this guy can fit 18x8.75s i should be ok... but wheels are on the back burner now that my clutch has gone :/

XR5s have their turning circle limited compared to a normal focus, you might get rubbing with full lock

[c0n13oX]

Originally Posted by dazFX

XR5s have their turning circle limited compared to a normal focus, you might get rubbing with full lock

do you reckon ill be right with 8.5's then? its more of a poke issue than rubbing issue. will they poke out of the wheel well?

[DZFord]

XR5s have 8" width WITH the steering limiter

So 8.5" without the steering rack limiter on your LS Zetec may cause a rubbing issue.

I wouldn't purchase these wheels without a trial fitment

[c0n13oX]

Has anyone had problems fitting 18x8 on a lowered ls?

[c0n13oX]

Also, just went into a wheels shop, and the guy said id fit 8.75's on without scrubbing. I dont think hes right, but id be curious if they could fit them under, especially when lowered.

[marg99]

I thought they limited the turning circle on the performance models with the wider wheels.