LED vs Light - Page 2

TheInterceptor · 28-10-2009, 10:05 PM

sorry to be a bit of topic but on the subject of LED's,

Do T10's fit as parkers?????

ronwest · 28-10-2009, 11:11 PM

Quote:

Originally Posted by TheInterceptor

sorry to be a bit of topic but on the subject of LED's,

Do T10's fit as parkers?????

I don't see why not.

I just went down the shed and fitted a T5 LED into the parker of a spare headlight I've got.
It was loose but at a pinch I could get it to fit (and stay there) so there should be no problem with a T10.

TheInterceptor · 28-10-2009, 11:19 PM

Thanks mate

Riksta · 29-10-2009, 11:22 AM

Quote:

Originally Posted by ebv8

i just replaced mine with blue leds and now i can't see the needle so at night i have to guess how fast i'm going so i'm taking them out and replacing them with std lights
I have 10 t5 blue leds forsale now

In the back of your dash cluster the places where you're globes go will be like this (in a bent form, 1 & 6 at the bottom and 3 & 4 at the top - I tried to do that on here but it wouldn't show properly).

1 2 3 4 5 6

To be able to see the needles, in slots 2 & 5 I have put normal globes for enough light to light the needles, and in all the other spots super bright blue LED's (they have 3 LED's per socket). Lights up the dash quite nice.

And for the globes behind the ODO display - go into any Autobarn/Repco etc and quote the part number "Narva 47734", they're about $2 each. I haven't even bothered trying to replace them with LED's.

Halfmo Rocks · 06-11-2009, 07:58 PM

Quote:

Originally Posted by TheInterceptor

sorry to be a bit of topic but on the subject of LED's,

Do T10's fit as parkers?????

yes...i have t10 blue LED's as parkers. pain in the **** to fit though.

i have done the LED's in the dash...but they suck...where might i buy real old fashioned glass bulbs from? i know ebay doesn't have them going anywhere

ronwest · 07-11-2009, 12:01 AM

Quote:

Originally Posted by Adam Rocks

yes...i have t10 blue LED's as parkers. pain in the **** to fit though.

i have done the LED's in the dash...but they suck...where might i buy real old fashioned glass bulbs from? i know ebay doesn't have them going anywhere

Why do yours suck?

GS608 · 07-11-2009, 07:59 AM

Quote:

Originally Posted by Adam Rocks

yes...i have t10 blue LED's as parkers. pain in the **** to fit though.

i have done the LED's in the dash...but they suck...where might i buy real old fashioned glass bulbs from? i know ebay doesn't have them going anywhere

autobarn, supercheap repco bursons take your pick i suppose.

Halfmo Rocks · 07-11-2009, 10:29 AM

Quote:

Originally Posted by ronwest

Why do yours suck?

they just ain't bright enough, very spotty - directional light...not being able to see the needles has already been mentioned

Quote:

Originally Posted by XRCHIEF

autobarn, supercheap repco bursons take your pick i suppose.

thanks mate...figured as much - i'll check them out...sucks i can't find em online though

ronwest · 07-11-2009, 11:03 AM

Quote:

Originally Posted by Adam Rocks

they just ain't bright enough, very spotty - directional light...not being able to see the needles has already been mentioned

The needles are a problem but the spotty effect is overcome by painting the top of the globe white. That tends to diffuse the light. When I was playing around with mine I came a cross some "three-legged" LEDs which you could splay the legs to suit the dark spots. They were much better but better again when I also painted the tips of them.

Mine are plenty bright enough and only one small darker area but the needles really do need sorting out.
I have that marked down at "Job 257" so there's a few jobs to get through first, lol.

ronwest · 07-11-2009, 12:23 PM

Just for reference, these are "six-legged" leds. Would prob be better for diffusion than the three-legged that I used.
http://cgi.ebay.com.au/T10-6-LED-Blu...item5ad414d02f

Halfmo Rocks · 07-11-2009, 12:37 PM

Quote:

Originally Posted by ronwest

Just for reference, these are "six-legged" leds. Would prob be better for diffusion than the three-legged that I used.
http://cgi.ebay.com.au/T10-6-LED-Blu...item5ad414d02f

if they were t5's it might solve my problem...buy they are t10's.

i have tried the 3 legged ones...better than the single...but now by much, socket is too narrow to spread the 3 as wide as u want

in any case...it's just not the same as real glass bulbs

ronwest · 07-11-2009, 01:21 PM

Quote:

Originally Posted by Adam Rocks

if they were t5's it might solve my problem...buy they are t10's.

i have tried the 3 legged ones...better than the single...but now by much, socket is too narrow to spread the 3 as wide as u want

in any case...it's just not the same as real glass bulbs

Oops, meant to say they are the "type" not necessarily the size.

I guess it's horses for courses. I much prefer the blue to the standard globes.

If I can work the needles out I'll be a happy chappy

edit: I just rem that I spread the "legs" (can we say spread the legs?) with a jewellers driver after I had the globe loosely fitted in the socket.

GS608 · 07-11-2009, 06:46 PM

As riksta posted earlier i think he may have a solution to the needles.

replace 1,6 & 3,4 with the blue LED and leave 2,5 as the normal globes, i havn't tried it yet but if he says it works a treat then that's fine by me

Halfmo Rocks · 07-11-2009, 08:16 PM

the outside isn't the problem...it's the centre...less lights on a greater area mean poor lighting. mine is fine around the edges...but the speedo's lighting sucks

GS608 · 12-11-2009, 12:09 PM

If we got glow in the dark paint and repainted the needles with it, would that solve the no needle at night problem ;)

ronwest · 12-11-2009, 01:35 PM

Quote:

Originally Posted by XR-CHIEF

If we got glow in the dark paint and repainted the needles with it, would that solve the no needle at night problem ;)

No, I tried it.

The light needs to come from in front of the needles for that to work.

GS608 · 12-11-2009, 03:12 PM

bugger, whats the difference between the S1 fairmont and S2? lighting wise, as i've seen pics of HLC's mont with the blue speedo and red needles/other red parts lit up.

ronwest · 12-11-2009, 04:02 PM

Quote:

Originally Posted by XR-CHIEF

bugger, whats the difference between the S1 fairmont and S2? lighting wise, as i've seen pics of HLC's mont with the blue speedo and red needles/other red parts lit up.

I read somewhere that S1 needles are clear plastic with an orange coating. The coating could be scraped off leaving the needles clear.

S2's have orange plastic needles (no coating).

I don't know what else Henri did... perhaps he'll see this and comment.