|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-02-2008, 05:55 PM
|
#1 | ||
|
Banned
Join Date: Sep 2007
Posts: 855
|
Hi can someone tell me what size roller rockers are in the au 2 xr8 ute? how long are the pushrods? and how good/strong are the springs and lifters?
Thanks heaps need the info before i open it up to see what needs changing with the cam upgrade?...... Thank you for any help you can give  cheers peter |
||
|
|
|
06-02-2008, 09:45 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 2,256
|
Cant help you with pushrod size, the rollers are 1.6 ratio crane units, the springs arent that flash, just adequate for the job, not suitable for a bigger cam.
If you are going to do a bigger cam swap, i would suggest using quality moly retainers and collets, aswell as decent springs. I might have a set of 1.72 factory spec yella terra rollers for sale, done about 30,000 kms, YT part # ST2027 if your interested let me know. |
||
|
|
|
|
07-02-2008, 05:03 PM
|
#3 | ||
|
Banned
Join Date: Sep 2007
Posts: 855
|
How much are you chasing for the roller rockers? Cheers peter
|
||
|
|
|
Can someone help?
Linear Mode
