![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
Shockworks Ford damper specialist located in Melbourne's S.E suburbs. Website Link |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | ||
FF.Com.Au Hardcore
Join Date: Dec 2010
Location: Sydney
Posts: 618
|
|
||
![]() |
![]() ![]() |
9 users like this post: |
![]() |
#2 | ||
Regular Member
Join Date: Nov 2007
Posts: 362
|
Do you have any pic of them installed.
Thanks Gerard |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
FF.Com.Au Hardcore
Join Date: Dec 2010
Location: Sydney
Posts: 618
|
Here are some more pictures. Hoping it would help dummies like me who never installed suspension before. Still evaluating the overall handling of the car, but from what I have experienced so far the car handles like night and day compared to the factory set up at 2 clicks above from soft which has a maximum of 10 clicks.
Old shock and new shock ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Regular Member
Join Date: Nov 2007
Posts: 362
|
Cool thanks for them, is that the adjuster on the bottom of the rear shock.
Gerard |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
FF.Com.Au Hardcore
Join Date: Dec 2010
Location: Sydney
Posts: 618
|
Yep, its covered a bit by the rubber sleeve. You can't really see it underneath the car, its just a matter of feeling it when adjusting it. Going harder makes it harder to turn and going softer is easier, so I just dial it all the way back down to soft then go up from there.
|
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#6 | ||
FF.Com.Au Hardcore
Join Date: Jul 2008
Posts: 1,057
|
Good to see some $ on handling!
![]() Have you tested them out on the circuit yet? http://www.fordforums.com.au/showthread.php?t=11396563
__________________
FG XR6T ZF 350,000kms+ Road registered Lap record holder at Wakefield for any Ford or 2wd 4 door, of any make.....ever!! Wakefield 1.07.4 SMP GP 1.48.1 Marulan 43.4 Winton 1.35.4 |
||
![]() |
![]() ![]() |
![]() |
#7 | ||
FF.Com.Au Hardcore
Join Date: Dec 2010
Location: Sydney
Posts: 618
|
Nah mate. Just got the heights dialed in today.
This was the first upgrade I felt absolutely necessary on this car when I bought it. Just felt too disconnected from the road. Still haven't taken it to the track since I bought it, but plan to as I now have the tires (Bridgestone RE11) and suspension in check for some proper track work. |
||
![]() |
![]() ![]() |
![]() |
#8 | ||
FF.Com.Au Hardcore
Join Date: Jul 2008
Posts: 1,057
|
What is the spring rate on the rears?
__________________
FG XR6T ZF 350,000kms+ Road registered Lap record holder at Wakefield for any Ford or 2wd 4 door, of any make.....ever!! Wakefield 1.07.4 SMP GP 1.48.1 Marulan 43.4 Winton 1.35.4 |
||
![]() |
![]() ![]() |
![]() |
#9 | ||
FF.Com.Au Hardcore
Join Date: Dec 2010
Location: Sydney
Posts: 618
|
Spring rates are 9kg front and 7kg rear. Could probably go higher for a more track orientated set up. Brett can do custom spring rates.
__________________
FG MKII GT ZF, 444.8rwkw, 61mm YT snout, 1000cc injectors, 460lph fuel pump, big kpm intercooler, shockworks w/12kg front springs, SSR GTX01 18X9.5" +22 F/R, nizpro input shaft, 1pce 4" AL tailshaft, poly bushings all round, trutrac, headerback exhaust 3", whiteline sway bars, IMS diff hat, herrod spark booster, Alpine R type speakers/Alpine R type 2x12" ported subs/Pioneer GM-D9601/8604 amps and other bits |
||
![]() |
![]() ![]() |
![]() |
#10 | |||
Regular Member
Join Date: Jan 2013
Posts: 304
|
Quote:
I think you will be surprised with the performance at the track with the current rates. The overall balance we found to be great for a combination of high speed corners, but also very good for the slower parts of the track like Winton or Sandown. I hope you having fun mate!! Cheers Brett |
|||
![]() |
![]() ![]() |