AU Parts Data - Page 8

**russellw** · 05-07-2007, 12:14 AM

Quote:

Originally Posted by Luke Plaizier

I have a couple.

(1) Is there a part number for the BA ICC Harness from BEM interface J4 - ie, the harness that always drives the Remote Key Receiver, but also has variants that drives the ICC Video input, Cabin Temp Sensor and Clock? I've searched with most of those as keywords without much luck.

(2) Is there a Part Number for the courtesy light with integrated switch that you see over the rear seats in BA XR's, and in behind the Sunvisor in Fairmonts and above? Once again, keyword searches have drawn a blank.

(3) In your database I found mention of the part number AU2 17E704 A 'MODULATOR MIRROR CTR, WITH MEMORY MIRROR' when searching on the word 'Mirror' and selecting BA. Since I'm interested in adding Memory Mirrors with Reverse Dip - is there any chance that anyone knows what this module is and what it does? It's not listed in the BA Workshop Manual anywhere. I've often been curious as to how the Memory Module under the seat could control the mirrors, and have been suspicious that there's another undocumented controller somewhere - and this is the first possible evidence of something like that.

Luke

(1) Looks like this is actually part of the main wiring loom.

(2) There are 2 seperate parts that make up this lamp but it is available as a kit:

BA 13A701 A LAMP ASSY - 13.40

(3) You are correct in your assumption as it is only fitted to vehicles with Memory function. The little pic below is it in diagrammatic form.

Cheers
Russ

Texas · 28-07-2007, 08:30 PM

Hi Russ , a mate of my has got a au Ford trying to fit a Au Hawk front grill, holes line up but there is a gap of about 2-3 inches .From bonnet to grill is there another part he needs?THANKS.

**russellw** · 30-07-2007, 02:31 PM

Quote:

Originally Posted by Texas

Hi Russ , a mate of my has got a au Ford trying to fit a Au Hawk front grill, holes line up but there is a gap of about 2-3 inches .From bonnet to grill is there another part he needs?THANKS.

There is a little infill panel that was used on the AU -

AU2 8C104 A Moulding, Radiator Grille 52.10

Cheers
Russ

Texas · 30-07-2007, 06:46 PM

Thank You So Much Russ . Cheers & Beers,

normell · 13-08-2007, 08:41 PM

Hi Russ
The plastic guard type thingie, under the front lower bumper has split, makes a load of noise.
Question is do you have a part number & price, and would a second hand unit do.

Normell

**russellw** · 13-08-2007, 11:33 PM

I presume you are referring to the undertray that sits under the engine?

I can't find a listing for it but a 2nd hand one would be fine I would think - they don't seem to last very long anyway and it is better to use screws and speed nuts rather than refitting them with the bloody useless xmas tree clips.

Cheers
Russ

**Mechan1k** · 11-11-2007, 04:02 PM

Quote:

Originally Posted by russellw

I presume you are referring to the undertray that sits under the engine?

I can't find a listing for it but a 2nd hand one would be fine I would think - they don't seem to last very long anyway and it is better to use screws and speed nuts rather than refitting them with the bloody useless xmas tree clips.

Cheers
Russ

That reminds me ... I need to put mine back one ... with something stronger.

sly · 11-11-2007, 03:46 PM

I think it's called a "deflector", kinda rings a bell, I've had 4 in 320,000km & have given up replacing them for now.

**russellw** · 19-12-2007, 08:16 PM

No - just the cover and insert.

Russ

fourl6 · 30-01-2008, 07:28 PM

Quote:

ER 10C975 A KIT CRUISE CONTROL, CONVERSION KIT - MAN TRANSMISSION, FORTE/S/XR6 $70.20

am i correct in thinking i can fit cruise control myself for around $70...?

also is this the red stripe in the doors of the AU XRs...?

Quote:

ERT F254A59 A MOULDING INSERT LH, RED, ALL EXCEPT HOT CHILLI RED - P4, XR $11.05
ERT F254A58 A MOULDING INSERT RH, RED, ALL EXCEPT HOT CHILLI RED - P4, XR $14.04
ERT F20861 A MOULDING INSERT LH, RED, ALL EXCEPT HOT CHILLI RED - P4, XR $17.68
ERT F20860 A MOULDING INSERT RH, RED, ALL EXCEPT HOT CHILLI RED - P4, XR $17.68

and are these is the front and rear bar stripes...?

Quote:

ERTVE 17D889 A TRANSFER F BUMPER RH, RED, XR $13.39
ERTVE 17D934 A TRANSFER F BUMPER LH, RED, XR $13.39

fourl6 · 03-02-2008, 01:42 AM

anyone...?

**russellw** · 03-02-2008, 03:17 PM

On your first point the answer is no. That is only the conversion kit.

You are correct with the body side mouldings.

The front bar transfers are not the moulding as it is listed on it's own but it's not clear from the diagram what they are. There are a similar set for the rear bar.

Cheers
Russ

philstoj · 03-02-2008, 03:52 PM

Hey Russ, can you check if floor carpet is still available for AU XR ute or sedan?
Also price please.

cheers, phil.

**russellw** · 03-02-2008, 11:21 PM

Sedan appears to still be available:

ER F13000 A6 CARPET, 4 DR SED, FORTE/FUTURA/S/XR, WARM CHARCOAL $ 664.30

Can't find a listing for the Ute but it is likely to also be available at about half that cost.

Cheers
Russ

philstoj · 04-02-2008, 12:16 AM

Thanks Russ.

AU1XLS · 13-02-2008, 11:07 PM

Quote:

Originally Posted by russellw

Sedan appears to still be available:

ER F13000 A6 CARPET, 4 DR SED, FORTE/FUTURA/S/XR, WARM CHARCOAL $ 664.30

Can't find a listing for the Ute but it is likely to also be available at about half that cost.

Cheers
Russ

Ute carpet AUC2 P13002A6 Warm Charcoal (No Longer Available)

GTsteveMkII · 18-06-2008, 02:13 PM

Does anyone know if the little T-Series badge that is in the centre of the dash on automatic TE50's, TS50's and TL50's (excluding T3 TE50) is still available and what the part number is? Thanks.

T3man · 18-06-2008, 07:18 PM

The part number is

TAU F04460 A

Sadly no longer available (see your other thread). However if you can get one ... get two! I'll have one please. BTW the list price was $27.90 the last time I bought one.

JeffAU1 · 09-11-2008, 05:22 PM

Hi

I need to know the part number for the item in the picture and price if you know. Its for a au1 Falcon Sedan.

The left hand side front cover fell off after my last service.

Thanks
Jeff

**russellw** · 09-11-2008, 06:57 PM

ER F001A06 A DEFLECTOR AIR FRT RH, (-)XR - about $13

Cheers
Russ

5L · 29-04-2009, 05:12 PM

anyone know the part number for the REAR IRS MOUNTS?

**russellw** · 30-04-2009, 06:19 PM

If they are the ones I am thinking of then:

AU2 5T120 B (RH)
AU2 5T121 B (LH)

EgoFalcon · 09-01-2010, 01:52 AM

Whats another name for the side guards?

**russellw** · 09-01-2010, 02:58 PM

When you say side guards I presume you mean the bodywork at the front side? If so, they are referred to in Ford speak as fenders.

Cheers
Russ

Tezbo-BAXR8 · 03-04-2010, 04:04 PM

I have a set of ACL Duralite pistons that came out of an XD motor that I built years ago. The engine had a crack in the block and was pumping oil into the water. Very dissapointing at the time, but does anybody know wether I can uyse these pistons in an AU block?