|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
26-06-2013, 10:12 PM
|
#1 | ||
|
AU II XR8
Join Date: Mar 2006
Location: melbourne
Posts: 978
|
A rather strange problem I have with the XR8 is the throttle sticking. Once the car has either warmed up or given a boot ful, the throttle sticks once I have released the pedal. When I put my foot down, I need to use a little force to get it unstuck, which can cause quite a rough ride!
A soon as I shut the engine down and it stops winding over, the throttle frees up and is back to normal! I removed the throttle cable and cruise control cable an tried moving the throttle arm by hand and had the same problem until the engine shut down. I read another thread earlier about the same problem and the harmonic balancer was mentioned, so changed that as well, but no success. Iv given the throttle body a clean and a lube as well. And as a reminder, it's perfectly fine when the engine is cold or has been sitting a little while. None of the sensors on the throttle body are causing it to stick either as I had the removed when the engine was running. I'm at the point of pulling the throttle body of and pulling it apart for a good clean. If that doesn't fix it then who knows?!
__________________
AU XR8 II ute XD FAIRMONT GHIA 302 XA FAIRMONT 302 TOPLOADER |
||
|
|
|
26-06-2013, 10:13 PM
|
#2 | ||
|
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
Loose vacuum hose anywhere?
__________________
RAM 1500
|
||
|
|
|
|
26-06-2013, 10:28 PM
|
#3 | ||
|
AU II XR8
Join Date: Mar 2006
Location: melbourne
Posts: 978
|
Not that I could see. What's the reason?
__________________
AU XR8 II ute XD FAIRMONT GHIA 302 XA FAIRMONT 302 TOPLOADER |
||
|
|
|
|
26-06-2013, 10:48 PM
|
#4 | ||
|
www.sctflashtuning.com
Join Date: Jan 2005
Posts: 3,142
|
Common problem , screw the throttle stop screw in half a turn and problem solved
__________________
Australia's No1 Ford Enhancement Specialist 103 Northgate Drive Thomastown VIC 3074 Phone: 03 9464 5100 Fax: 03 9464 5166 |
||
|
|
|
|
26-06-2013, 10:50 PM
|
#5 | ||
|
AU II XR8
Join Date: Mar 2006
Location: melbourne
Posts: 978
|
Thank you! Will try it tomorrow.
Ill also keep an eye out for a vac problem b2tf, thanks.
__________________
AU XR8 II ute XD FAIRMONT GHIA 302 XA FAIRMONT 302 TOPLOADER |
||
|
|
|
|
04-07-2013, 05:48 PM
|
#6 | ||
|
AU II XR8
Join Date: Mar 2006
Location: melbourne
Posts: 978
|
So after winding the idle screw in a little, it made the problem a little better, but it was still there enough to **** me off, and after a little thought, I came to the conclusion that it must be an air pressure sort of thing, causing the butterfly valve closed!
So then I wet searching for a loose vacuum hose thanks to b2tf! Turned out that the PCV hose was half hanging out. Something I wouldn't have thought would cause such a problem, but anyway, thankfully it's gone!
__________________
AU XR8 II ute XD FAIRMONT GHIA 302 XA FAIRMONT 302 TOPLOADER |
||
|
|
|
|
08-07-2013, 11:41 AM
|
#7 | ||
|
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
Glad you solved it. I've had it happen to me before with the last ute and I found the hose hanging out of the back of the manifold which is a real bugger to get back in, hence my thinking it may have been something along those lines.
Now that you've fixed it, I'll give you $3k for the car 
__________________
RAM 1500
|
||
|
|
|
XR8 throttle sticking - only when engine is running
Linear Mode
