Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Mondeo

Reply
 
Thread Tools Display Modes
Old 14-02-2020, 03:52 PM   #1
adyadad
Starter Motor
 
Join Date: Aug 2018
Posts: 22
Default Diesel oil filter and map version

Hi all.
I need to do an oil change on the daughter's 2015 diesel but need to know if it's an element or cartridge type. Can anyone confirm and give the Ryco number please?
On a side note, how do I check the map version on the wife's 2016? I don't think it was updated last service and it's almost due again.
Thanks in advance.
adyadad is offline   Reply With Quote Multi-Quote with this Post
Old 14-02-2020, 04:06 PM   #2
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 15,026
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: Diesel oil filter and map version

EDIT: Please ignore this response I thought we were talking a Territory rather than a Mondeo. It says this one cartridge one: https://www.rycofilters.com.au/catal...ex/part/R2662P here: https://www.rycofilters.com.au/Searc...ar=2015&liter=
__________________
regards Blue

Last edited by aussiblue; 14-02-2020 at 04:34 PM.
aussiblue is offline   Reply With Quote Multi-Quote with this Post
Old 14-02-2020, 04:17 PM   #3
adyadad
Starter Motor
 
Join Date: Aug 2018
Posts: 22
Default Re: Diesel oil filter and map version

Thanks Blue but I went to the site and it said Z2999 for an MD. The closest to the 2663 is R2662P for an MB.
Now I'm really confused as to the right one.
adyadad is offline   Reply With Quote Multi-Quote with this Post
Old 14-02-2020, 04:33 PM   #4
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 15,026
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: Diesel oil filter and map version

Quote:
Thanks Blue but I went to the site and it said Z2999 for an MD. The closest to the 2663 is R2662P for an MB.
Now I'm really confused as to the right one.
Oops Sorry I thought it was diesel Territory. My fault trying to reply to too many threads at once. Yes; so its Z999 spin on per https://www.rycofilters.com.au/Searc...ar=2015&liter= and https://www.rycofilters.com.au/catal...ndex/part/Z999 and you need to but a new single used sump plug https://www.rycofilters.com.au/catal...ex/part/RFA303

PS: Another good reason to always specify the vehicle when asking a question. Yes; it was in the Mondeo section but I always just search by new posts.
__________________
regards Blue
aussiblue is offline   Reply With Quote Multi-Quote with this Post
Old 14-02-2020, 04:54 PM   #5
adyadad
Starter Motor
 
Join Date: Aug 2018
Posts: 22
Default Re: Diesel oil filter and map version

Thanks Blue. Your input is greatly appreciated.
adyadad is offline   Reply With Quote Multi-Quote with this Post
Old 14-02-2020, 06:58 PM   #6
thebigd
Regular Member
 
Join Date: Oct 2009
Location: 4074
Posts: 63
Default Re: Diesel oil filter and map version

Quote:
Originally Posted by aussiblue View Post
and you need to buy a new single use sump plug
Interesting that. I get mine serviced by a local mechanic, and always provide my own oil and filter. Will provide a sump plug next service.
thebigd is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 14-02-2020, 08:16 PM   #7
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 15,026
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: Diesel oil filter and map version

Then there's the special plastic sump plug remover installer tool: https://www.lasertools.co.uk/product/6928 and https://www.ebay.com.au/itm/Plastic-...wAAOSwp-RaaFOy I am not sure any of this is an advance in car service technology. You can bulk by the plugs https://www.ebay.com.au/itm/Ford-PSA...-/264289774760
__________________
regards Blue
aussiblue is offline   Reply With Quote Multi-Quote with this Post
Old 14-02-2020, 08:44 PM   #8
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 15,026
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: Diesel oil filter and map version

This may help https://www.youtube.com/watch?v=aq4cI-RjaWU looks like the servos probably reuse that single use bung. Also https://www.youtube.com/watch?v=YLUwxCYH5VU and https://www.youtube.com/watch?v=ln43g2fnLGU

And for the air and fuel filter: https://www.youtube.com/watch?v=sKJmOoccmag

Also some good hints here:https://www.youtube.com/watch?v=PkDWvT1A09E
__________________
regards Blue
aussiblue is offline   Reply With Quote Multi-Quote with this Post
Old 14-02-2020, 09:05 PM   #9
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 15,026
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: Diesel oil filter and map version

You have to admire his sense of humour: https://www.youtube.com/watch?v=tZCUrqADWR0 Probably worth all Mk 5 Diesel owners subscribing to his channel. He has fleet of them as taxis so he is going to find and tell you about all sorts of interesting things.
__________________
regards Blue

Last edited by aussiblue; 14-02-2020 at 09:16 PM.
aussiblue is offline   Reply With Quote Multi-Quote with this Post
Old 14-02-2020, 09:42 PM   #10
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 15,026
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: Diesel oil filter and map version

And don't forget to check/change the cabin filter https://www.youtube.com/watch?v=5cT3...nKuk7&index=23
__________________
regards Blue
aussiblue is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2020, 05:16 AM   #11
adyadad
Starter Motor
 
Join Date: Aug 2018
Posts: 22
Default Re: Diesel oil filter and map version

Appreciate the assistance Blue. While I've been working on cars since I was about 10 (I'm now 60), I'm new to the mondeo and their quirks so it's just a matter if getting used to it.
I've never had a car that changes the cabin filter every 15000. They've all been at 30k.
I might even have a go at making one of the plug removal tools. It looks easy. I've got a lathe and a milling machine so it shouldn't take too long.
adyadad is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 15-02-2020, 08:58 AM   #12
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 15,026
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: Diesel oil filter and map version

Quote:
I might even have a go at making one of the plug removal tools. It looks easy. I've got a lathe and a milling machine so it shouldn't take too long.
From the video https://www.youtube.com/watch?v=aq4cI-RjaWU it looks easy enough to screw in and out by hand; just heed the warning young fellow (I'm 67 this year) about getting burnt with the massive amount of hot oil that pours out.
__________________
regards Blue

Last edited by aussiblue; 15-02-2020 at 09:06 AM.
aussiblue is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2020, 09:15 AM   #13
adyadad
Starter Motor
 
Join Date: Aug 2018
Posts: 22
Default Re: Diesel oil filter and map version

Haha. I like the term young fellow.
It does look easy to remove by hand but then you risk being burnt.
I'd more than likely set it up like a socket on an L bar.
I've been caught out before.
adyadad is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 09:25 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL