|
|
|
|
|
08-11-2005, 06:25 PM
|
#1 | ||
|
Barra Turbo > V8
  
Join Date: Jan 2005
Posts: 25,385
|
i wanna lower my car to the legal height ust wondering if anyone has any good places to go to or not to, suggestions about shocks springs etc btw im in Albury NSW/VIC border i have 1 qoute from pedders 750 inc 4 shcoks, springs, fitting wheels balance
Cheers Dallas
__________________
2011 XR6 Turbo Ute - Manual - Lux Pack - Twin 2.5" Stainless Exhaust - Antz Turboside Intake - CCForged Phatlux wheels - Tuned by LS Tuning and Performance |
||
|
|
|
08-11-2005, 11:25 PM
|
#2 | ||
|
Miami Pilot
 
Join Date: Jan 2005
Location: ACT
Posts: 21,701
|
Unless you plan to do it yourself, $750 will be hard to beat. Springs are around $260, shocks around $350, so $140 for fitting and alignment is pretty good.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
|
|
|
|
08-11-2005, 11:48 PM
|
#3 | |||
|
Regular Member
Join Date: Sep 2005
Location: Melbourne
Posts: 125
|
Quote:
Yep agree that is a good price. XR models use 4 struts (IRS) and you probably won't buy them under $400. If you can do it yourself do it and reuse the same struts if they don't have excessive klms, You will save yourself a packet. All depends how low you want to go though. If your going real low you will need different struts  _2:
__________________
2006 BF Egas XR6 Ute. Bone stock - Sorry Fellas I've had a set of King Springs in the garage for 12 months who knows when I'll get around to putting them on  :
Last edited by mattbl; 08-11-2005 at 11:57 PM. |
|||
|
|
|
|
09-11-2005, 12:49 AM
|
#4 | |||
|
Miami Pilot
Join Date: Jan 2005
Location: ACT
Posts: 21,701
|
Quote:
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
|||
|
|
|
|
09-11-2005, 12:55 AM
|
#5 | ||
|
Built Ford Tough
Join Date: Jan 2005
Location: State of Euphoria Mod: F-Series
Posts: 3,035
|
The height adjustable coilovers are a good buy for the front. Mines King Pro-Sport (thanks for the contact JC) but I'm not sure if they still do them. Too low? Move em up! (As I had to after they settled down - too low!) Rears are a standard lower spring/shock combo.
__________________
Black on white '83 SWB F100 C6 auto 351C on gas and on the ground --> Project Thread '55 F100, just a roller at the moment, new project Silver MY12 Volkswagen Amarok |
||
|
|
|
|
09-11-2005, 12:57 AM
|
#6 | |||
|
Regular Member
Join Date: Sep 2005
Location: Melbourne
Posts: 125
|
Quote:
Matt  : JC:evil_laug
__________________
2006 BF Egas XR6 Ute. Bone stock - Sorry Fellas I've had a set of King Springs in the garage for 12 months who knows when I'll get around to putting them on :
|
|||
|
|
|
Lowering my AUII XR6 HP
Linear Mode
