![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Starter Motor
Join Date: Nov 2021
Posts: 6
|
Hi, hoping to get some help with the tail/brake light issue on my 2007 Focus CL please.
Day time driving all brake lights work as they should (including the top centre brake light) All indicator lights work fine. Night time driving the tail lights work fine however when the brake is pressed the top rear centre brake light engages, however the left & right tail lights completely go out and the brake lights do not engage? (there is no rear lights apart from top centre brake light) I have checked all the globes & the light housing connections seem fine, fuses are all fine. I also checked the rear number plate fuse and lights as I had heard it may be linked by means of grounding the brake lights but they fine also? How can they work during the day but not when the head lights are operational? Any ideas help would be appreciated ![]() ![]() |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
Join Date: Apr 2014
Location: NSW
Posts: 1,610
|
Indicates a earth problem to the lights
Check for a loose or burnt common earth point in wiring at rear or run a temporary wire between globe holder earth connection and body |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#3 | ||
FF.Com.Au Hardcore
Join Date: Jul 2008
Location: Melbourne
Posts: 804
|
faulty earth works that until you add the tail and brake lights to the demand. 11Ford11 is correct
|
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#4 | ||
Starter Motor
Join Date: Nov 2021
Posts: 6
|
Thanks for the replies. I will check the wiring, it did seem to look ok? What exactly should I be looking for in grounding issue? Im not really sure what colour the earth wire should be? Appreciate the responses.
|
||
![]() |
![]() ![]() |
![]() |
#5 | ||
FF.Com.Au Hardcore
Join Date: Jul 2008
Location: Melbourne
Posts: 804
|
find where the ground is bolted/screwed to the body unscrew it clean the area so it clean metal and reattach.most likely in the trunk area Usually they are black wires.
|
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#6 | ||
FF.Com.Au Hardcore
Join Date: Apr 2014
Location: NSW
Posts: 1,610
|
Black wires
Screwed to left and right side of luggage compartment about half way back and half way up check any black wires connected to the body work in this area Another location to check after this is under the front door scuff plates screwed to the sill Did you try connecting your own wire to the ground wire of the lights and screwing it to earth |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#7 | ||
Starter Motor
Join Date: Nov 2021
Posts: 6
|
Thanks for the reply everyone, have not been able to check the ground issue yet. Yesterday my daughter got stuck at the lights with no way of changing gears, clutch pedal flat to the floor. Long story short got towed to repair shop and now quoted 2-3 thousand to fix a clutch cylinder! Only just found this out 5 minutes ago. Needless to say the lights may take a back seat for now!? 🥲
|
||
![]() |
![]() ![]() |
![]() |
#8 | ||
FF.Com.Au Hardcore
Join Date: Jul 2008
Location: Melbourne
Posts: 804
|
the slave cylinder is inside the bell housing so its a big job and probably should replace clutch at same time
|
||
![]() |
![]() ![]() |
![]() |
#9 | ||
Starter Motor
Join Date: Nov 2021
Posts: 6
|
Hey thanks again for the help. Is 2-3.5 thousand around the mark for this kind of repair work? Not sure if it’s worth ringing a few other places first although it’s already been towed to the mechanics. (Who I believe to be fair) ? Cheers again
|
||
![]() |
![]() ![]() |
![]() |
#10 | ||
Regular Member
Join Date: Aug 2013
Posts: 90
|
Hi, be careful if you just replace the clutch. That model (I think)has a variable mass flywheel. I changed mine and bought a kit complete with solid flywheel think it was around $900.
|
||
![]() |
![]() ![]() |
![]() |
#11 | ||
Starter Motor
Join Date: Nov 2021
Posts: 6
|
Hi folks, apologies for the absence.
My daughter had a conversion kit from dual fly wheel to single installed on the vehicle, did the whole clutch & now have it back. (Bit tight coming into Christmas hence the wait) Now I will get a chance to look for the ground to address original post lol Thanks I’ll update when can 👌🏼👍🏼 |
||
![]() |
![]() ![]() |
![]() |
#12 | |||
Starter Motor
Join Date: Nov 2021
Posts: 6
|
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#13 | ||
FF.Com.Au Hardcore
Join Date: Apr 2014
Location: NSW
Posts: 1,610
|
Put your own earths to the light sockets by adding a piece of wire onto the earth wire (black wire normally) near the sockets and attaching under a screw or bolt nearby
|
||
![]() |
![]() ![]() |
![]() |
#14 | ||
Starter Motor
Join Date: Oct 2015
Posts: 3
|
Its more than likely inside one of the bulb holders itself . I had a similar issue . the wiring between where the plug connects and the light slots in is not one continual wire, its two pieces. It could be they are arcing /shorting causing your issue.
https://www.youtube.com/watch?v=oK7l...iedPerformance |
||
![]() |
![]() ![]() |