|
|
|
|
|
01-05-2014, 04:23 PM
|
#1 | ||
|
Regular Member
Join Date: Mar 2011
Posts: 33
|
Hi guys,
does anybody know how bleed the hydraulic clutch system in 2010 model LV? I can't see any slave cylinder around the gearbox. thanks |
||
|
|
|
01-05-2014, 05:18 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2008
Location: Melbourne
Posts: 804
|
I believe the slave is inside the flywheel /gearbox housing
My manual says "the internal slave cylinder cannot be removed with the transmission in place" & even more unhelpful it says:"The clutch release bearing is integral with the slave cylinder" |
||
|
|
|
|
01-05-2014, 09:04 PM
|
#3 | ||
|
Regular Member
Join Date: Mar 2011
Posts: 33
|
Thanks marg99, not a great design but surely there must be a bleeder somewhere.
What manual do you have? |
||
|
|
|
|
03-05-2014, 06:45 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2008
Location: Melbourne
Posts: 804
|
I have the UK Haynes manual for the diesel models The set up is strange as you say because they have no separate clutch fluid reservoir and use the brake one
|
||
|
|
|
|
03-05-2014, 07:13 PM
|
#5 | ||
|
Regular Member
Join Date: Mar 2011
Posts: 33
|
Is it specifically for our LV or LT model?
|
||
|
|
|
|
03-05-2014, 07:49 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2008
Location: Melbourne
Posts: 804
|
It covers a range of diesel focus cars but includes the LT diesel which was the first we had here. at the time there was no Australian specific manual. Look them up on line Haynes.com
|
||
|
|
|
|
03-05-2014, 08:02 PM
|
#7 | ||
|
Regular Member
Join Date: Mar 2011
Posts: 33
|
Yeh I will look for one thanks
|
||
|
|
|
LV TDCi - how to bleed clutch
Linear Mode
