|
|
Race Brakes Sydney Street and race performance pad / rotor combinations as well as brake upgrades and Exedy clutch kits. Website Link |
|
Thread Tools | Display Modes |
|
30-08-2013, 02:43 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Feb 2006
Location: QLD
Posts: 1,515
|
Is it safe to assume that wheels that clear 4 piston brembos will clear 6 piston also?
__________________
FG XR6T Ute
300rwkw |
||
30-08-2013, 02:48 PM | #2 | ||
BEN
Join Date: Jun 2011
Location: Perth WA
Posts: 4,875
|
Yes they should.
__________________
My Thread. The new whip: 2014 FGX XR8 Auto in victory gold. Mods : BMC air filter, 1500cc injectors, Walbro 485, 58mm kpm snout, kpm intercooler, 35% front and 20% rear tint, pedders supercar coilovers, whiteline sway bars, Phillips HIDs, lenso d1r wheels. 331rwkw. 12.7 sec stock as a rock with a passenger. Now with 620rwhp ready to run the 10 built zf, built tailshaft, corn juice all to come. The old rig: 2008 FG XR8 Auto in dash green with a tonne of mods to make 311rwkw. |
||
This user likes this post: |
30-08-2013, 05:10 PM | #3 | ||
Race Brakes Sydney
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,612
|
I won't say 100% yes but so far we have found it to be correct
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop Street to track is what we expertise in Phone 02 9609 1101 sales@racebrakessydney.com.au www.racebrakessydney.com.au |
||
30-08-2013, 05:38 PM | #4 | ||
Starter Motor
Join Date: Aug 2013
Posts: 8
|
On the fg i have about 65mm clearance from the stock caliper to the back of my wheel spoke. Is that enough to clear Brembos?
|
||
30-08-2013, 06:15 PM | #5 | ||
Race Brakes Sydney
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,612
|
From memory you need about 90mm from the outside face of the rotor to the inside face of the spoke. The brembo rotor was brought about 18mm or so closer to the rim before you even fit the caliperss.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop Street to track is what we expertise in Phone 02 9609 1101 sales@racebrakessydney.com.au www.racebrakessydney.com.au |
||
This user likes this post: |
30-08-2013, 10:51 PM | #7 | ||
BEN
Join Date: Jun 2011
Location: Perth WA
Posts: 4,875
|
What wheels are they?
__________________
My Thread. The new whip: 2014 FGX XR8 Auto in victory gold. Mods : BMC air filter, 1500cc injectors, Walbro 485, 58mm kpm snout, kpm intercooler, 35% front and 20% rear tint, pedders supercar coilovers, whiteline sway bars, Phillips HIDs, lenso d1r wheels. 331rwkw. 12.7 sec stock as a rock with a passenger. Now with 620rwhp ready to run the 10 built zf, built tailshaft, corn juice all to come. The old rig: 2008 FG XR8 Auto in dash green with a tonne of mods to make 311rwkw. |
||
30-08-2013, 10:54 PM | #8 | ||
Starter Motor
Join Date: Aug 2013
Posts: 8
|
|
||