Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > OzECruisers (E/N/D Series) > OzECruisers General Discussions

OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS

Reply
 
Thread Tools Display Modes
Old 31-12-2005, 04:57 PM   #1
FordFan86
meow
 
FordFan86's Avatar
 
Join Date: Dec 2004
Location: Where the Pirates are.
Posts: 2,744
Default That'll learn me!

Last few weeks as i've been turning corners i've noticed the front steering/suspension feeling "loose" about halfway thru.
Today (38degree day) Decided I'd better get under and have a look as yesterday it was happening pretty much every corner.... I just need to know what the thingy is... from front sway bar, it goes horizontal than up towards the tyre, and thru this vertically is a piece of metal with a bush at either end... I did all this *%#!**%#!**%#!**%#!* in tafe just can't for the life of me remember what it is called? (it's moved really easily with fingers... tried tightening to no avail.. bushes *%#!**%#!**%#!**%#!*ed?)
Also found my trans is leaking somewhere from the rear (input seal?) And has coverered my cats and the Y piece in ATF.. mmmm.. leak isn't major, but how much would this cost to rectify if it got worse.
The thing learned was... 38degrees + car run for 25minutes with aircon = hot exhaust and trans pan. No shirt (just home from work) and trying to wriggle out = BURNT!
In short, name of thing at the end of the sway bar.. control arm?
And, laugh as you will.

FordFan86 is offline   Reply With Quote Multi-Quote with this Post
Old 31-12-2005, 05:02 PM   #2
Damo
Banned
 
Join Date: Dec 2004
Posts: 4,078
Default

swaybar link arm. It goes into the lower control arm.
Damo is offline   Reply With Quote Multi-Quote with this Post
Old 31-12-2005, 05:46 PM   #3
FordFan86
meow
 
FordFan86's Avatar
 
Join Date: Dec 2004
Location: Where the Pirates are.
Posts: 2,744
Default

Quote:
Originally Posted by Damo
swaybar link arm. It goes into the lower control arm.
That's the one, thanks mate.
FordFan86 is offline   Reply With Quote Multi-Quote with this Post
Old 31-12-2005, 06:11 PM   #4
Madhatter
EF Fairmont Ghia
 
Join Date: Dec 2005
Location: QLD
Posts: 93
Default

Its a called a pin, not really an arm.

They are usually tightened when on the ground with the vehicle weight compressing the suspension (so you checked it with the wheels on the ground right?). The bushes arent really designed to be continually tightened once they were instaleld and set, if you have a lot of play they are probably worn and you need to replace them (they are usually called sway bar link bushes).
Madhatter is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:36 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL