|
01-05-2010, 12:09 PM | #1 | ||
The Monty
Join Date: Oct 2007
Location: Geelong
Posts: 1,226
|
ok so i know.. little if anything about brake parts ( i know how they work and what they are lol)
so i was woundering when u need new brake pads and u go to purchase them. is it a set of 2? does it do both sides (left & right) or just does one (left OR right) ? cheers brad` |
||
01-05-2010, 12:11 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Nov 2007
Location: Riff
Posts: 12,370
|
both left (x2) right (x2) in the one box.
__________________
FGII XR6 IN LIGHTNING STRIKE R52 SIII IN GUN METALLIC |
||
01-05-2010, 12:31 PM | #3 | ||
I wanna XR5
Join Date: Aug 2005
Location: South Oz
Posts: 749
|
Minimum thickness for the pad material is 2mm
rotors should be machined before new pads put in. have a look at this for a bit of a guide http://www.acdelco.com.au/PDFs/Catal...lco_Rotors.pdf you can buy pads at most Auto Parts shops. Now brakes are a very important part of you car if you are not sure go to a profesional.
__________________
Great Wall X240. Bouncing around the APY Lands Ex Ford owner and member of this great site for ages. South Australia, where the RIGHT hand lane is the NEW LEFT lane??????!!! %&#@* |
||