|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-08-2009, 05:20 PM
|
#1 | ||
|
2mny projects 2 lttl time
Join Date: Oct 2007
Location: Bald Hills Qld
Posts: 338
|
After changing batteries, starter won't engage and noticed central locking isn't working, either by key or by button on dash.
Battery is fully charged (tried 2) and ignition lights all come on but on "start", nothing happens except the smartshield "red hand" starts flashing. Checked the under dash and under bonnet fuses and all seem OK (damn). Tried selector both in Neutral and Park, and still nothing. Can anyone offer any suggestions? ....Please!......??? Thanks in advance, Keith. |
||
|
|
|
08-08-2009, 06:40 PM
|
#2 | ||
|
Donating Member
 
Join Date: Aug 2005
Location: St John's Park NSW
Posts: 1,454
|
Could be the BCM under the dash. It is located on the left side of the column under the dash. The connections may be loose? or, you might be up for a new one :(
|
||
|
|
|
|
08-08-2009, 07:43 PM
|
#3 | |||
|
AU DIE HARD
  
Join Date: Nov 2005
Location: Between 2nd and 5th gear
Posts: 5,073
 
|
Power surge maybe ? try disconnecting the batter again for 5 min. and turn lights on to drain all the power out, then reconnect it, If it's still no good it looks like a trip to Ford for a scan tool read out
__________________
........Age and treachery will ALWAYS overcome youth and skill....... CORTINA 250 2V POWER soon to be AUXR8 Windsor pwrd .............WINDSOR WARLORD WHO CARRIES THE CLEVO MAFIA AND BROKEN BOSSES... .........................  .........................Quote:
|
|||
|
|
|
|
08-08-2009, 10:54 PM
|
#4 | ||
|
When in doubt, GAS IT!!
Join Date: Sep 2006
Location: Lower Eyre Peninsula, SA
Posts: 3,018
|
Have you checked your battery terminals to make sure they're clean and tight. The posts will be clean cos it's a new battery but if the inner surface of the terminals are dirty it could cause resistance where there's enough power getting through to run the dash but as soon as you put any load on the battery by trying to start it or draw power it shorts out.
Bushbasher
__________________
. HERS- BFIII Wagon Gold, alloys, dual fuel, bullbar, big tow pack, trans cooler, fully rebuilt HD suspension, Clarion, alarmed, full 2 1/2" sports system, mint body MINE- AUII Forte Meteorite, dual fuel but otherwise bog stock. MINE- AUII Fairlane Sportsman Liquid Silver over meteorite,HIDs', Airhog, Eagle Leads, dual fuel, custom rear springs, BA slotted discs + a second one for spares . |
||
|
|
|
|
09-08-2009, 02:35 PM
|
#5 | ||
|
2mny projects 2 lttl time
Join Date: Oct 2007
Location: Bald Hills Qld
Posts: 338
|
Thanks all, looks like PapaSmurf was right
Replaced my light blue BEM with the pink one I have here and door locks would operate from the dash button but still no go. At least I think I've now isolated the problem to dodgy BEM. Might pull the light blue one out of my project ute and see if I can get it to start the car. Before I do though, I'd like to know if it will need to be retrained to suit my car or not. Thanks for all your help guys, MUCH APPRECIATED Keith |
||
|
|
|
|
09-08-2009, 09:42 PM
|
#6 | ||
|
Banned
Join Date: Dec 2004
Location: searching for cubes
Posts: 6,672
|
No good just plugging in any old BEM - it has to be "matched" to your car or the smartlock won't allow the ignition on.
|
||
|
|
|
AU3 won't start, central locking won't work
Linear Mode
