|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-07-2006, 08:09 PM
|
#1 | ||
|
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
Got a little nigggling problem with my brakes atm, at low speed braking i.e. 40kms and below, they squeal like crazy! I have cleaned them out as best I can but they still do it a fair bit. I know its a bit of a "live with it" problem, but is there anything I can try or have done to shut them up?
Btw, they are Herrod brakes (330mm upgrade at front).
__________________
2024 F150 XLT
|
||
|
|
|
09-07-2006, 08:19 PM
|
#2 | ||
|
Formally Kia Chaser
Join Date: May 2005
Location: Newcastle
Posts: 2,493
|
How worn are they? You could try toeing your brakes in (ie. think of toeing in tyres).
Maybe a disc shave?
__________________
Kia Grand Carnival (2006) Silver, Grill Mesh, Tints, Sidesteps (with lights), Towbar, 7" Touch Screen DVD Tuner with intergrated GPS & Bluetooth, Roof Mounted Flip Down 15.1" LCD Screen, Reverse Camera - 184Kw HSV Clubsport R8 VY (2003) Black, 6sp Manual, Coulson Seats, Red on black interior, Pacemaker extractors, Twin 2.5" exhaust, Custom Red 20" VE GTS Rims, Custom Red Stitching
|
||
|
|
|
|
09-07-2006, 08:53 PM
|
#3 | ||
|
Miami Pilot
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
|
It'll be coming from the back - the handbrake shoes need adjusting. Your friendly local dealer will do it, but 4 to 8 weeks later it will need to be done again. It's a fact of life for many Falcon, Commondore, Magma and Cardigan (oops camry) drivers.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
|
|
|
|
09-07-2006, 10:27 PM
|
#4 | ||
|
Starter Motor
Join Date: May 2005
Location: Nazza Wazza
Posts: 10
|
hahaha the good ol hand brake shoes.. its either too loose or too tight(squeak squeak), mines slightly on the tight side however the shoe relies on centrifugal force to centre itself to prevent it from rubbing(well thats the conclusion i came to when i pulled mine apart to figure it out!) the slower u go the shoe tends to drop and start rubbing against the inner walls of the disc, the faster u go it centres itself more.. hence the noise disappearing. I may not be 100% certain on this but its a thought.
|
||
|
|
|
|
10-07-2006, 10:42 AM
|
#5 | ||
|
Club Moderator
 Join Date: Dec 2004
Location: Tas
Posts: 3,744
|
I pulled my rear rotors and calipers off on the weekend. cleaned out the dust from the handbreak shoes and re-adjusted them. easy to do. made a hell of a difference. just remember to let the adjustment on the handbreak leaver itslelf go b4 you try and remove the rotors.
|
||
|
|
|
|
10-07-2006, 09:25 PM
|
#6 | ||
|
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
actually i reckon its more from the front?
__________________
2024 F150 XLT
|
||
|
|
|
|
10-07-2006, 09:43 PM
|
#7 | ||
|
Diabolus
Join Date: Oct 2005
Location: Brisbane
Posts: 155
|
They could be worn down to the little metal clip that is ment to squeal to tell you to replace the pads. Or maybe they have become glazed.
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Annoying brake squeal!
Linear Mode
