|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
06-09-2021, 09:45 AM | #1 | ||
Starter Motor
Join Date: Sep 2021
Posts: 5
|
Hi everyone,
I recently got my car and I've been struggling with getting it to run smoothly. After searching the ol' interweb, I was able to guidance about setting the ignition timing. On the kent 1600 x flow, I believe the firing order is 1243, anti-clockwise on the disi, 4 BTDC, with the disi cap pointing to #1 cylinder. All done but it seems cylinders 3 & 4 aren't firing. The car has a bad miss, so i pulled the plugs and they were both wet with unburn't fuel. This leads me to believe there's something wrong with the disi. Has anyone had similar problems? I would like to upgrade the entire ignition system to an electronic system, any advice with regards to brands and where I can get 'em from will be highly appreciated. Thanks in advance, Jon |
||