|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
08-11-2019, 11:15 AM
|
#1 | ||
|
Starter Motor
Join Date: Nov 2019
Posts: 3
|
Hey all, what have people used/done to bleed the diesel system on an MA Mondeo 2008 tdci? I've pumped and pumped and it seems there is continually a pocket of air forming around the diesel pump feed line. So I might need some form of stronger gear pump, as the pump I've got might not be strong enough to suck through the pump return line.
Also I have cracked the nut on the injector and cranked the motor, so I believe that's how you bleed the high pressure side? Had a problem where the car cut out with no codes. I swapped the diesel filter, injectors and pump with new and known working units. I made sure I pumped diesel back through the feed line so the whole feed line and filter pot is full of diesel. Thing still won't start and not showing any codes. Definately half a tank of diesel in there, I've added a good 20L to it. Thanks. |
||
|
|
Purge diesel system
Threaded Mode