|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
|
Thread Tools | Display Modes |
01-01-2018, 03:46 PM | #1 | ||
Donating Member
Join Date: Feb 2008
Posts: 11,429
|
I have followed this for a while now. I have always wanted to turn a 6 cylinder into a V-12. This is one fella who has done it using an engine I have always liked.
In the vid you will only see it idle, but that is a significant milestone on the project. It sounds good. http://www.enginelabs.com/news/video...-comes-to-life As a fan of EngineLabs, you’re probably at least somewhat familiar with Don Groff’s wild homebuilt V12 project. As we explained in our first article three years ago, this project involves the cutting, welding, stress-relieving, and align-boring of a pair of 1JZ inline six-cylinder engine blocks into a single 120-degree V12 engine block. In the second update to the project, a little over two years ago, Groff changed gears from a quad-turbo setup, to dual Garrett units, and got the exhaust manifold setup fleshed out. No small feat, with a final product that resembles the automotive version of Medusa’s hair. Then, two months ago, there was another update, in which all of the engine’s machine work and assembly had been finished up, and Groff had wrapped up the custom chassis. As to be expected when dropping in a completely custom engine into a completely custom chassis, there were a few hiccups, leaks, and misalignments, but Groff worked through them. Now, we are insanely excited to be able to bring you the video above, with the wild V12 dual 1JZ engine taking its first breath of life. “This is the first-time-ever start-up and is another major hurdle accomplished, thanks to the boys at Nth Moto,” Groff says. “I could not have done it without their help. They make it look easy, even if we did have a few issues to resolve.” As if tuning a custom-made dual 1JZ V12 engine with a pair of turbochargers wasn’t enough of a challenge, Groff added a twist by choosing ethanol to power the project. Controlled by an AEM Infinity ECU that has been wired and tuned by the team at Nth Moto – who specialize in exotic performance cars – and force-fed by a pair of Garrett GTX-series turbochargers which each have their own air-to-air intercooler, Groff’s creation purrs like a kitten. While it’s only an idle video, the fact is this: not only is the engine is running under its own power, but it’s doing so smoothly and with a gorgeous exhaust note. While we are practically salivating in anticipation of a dyno video of this homebuilt masterpiece, this video is proof of life, and we know that the final stages of development and tuning of the engine is near at hand. After all, Groff left us with the words we’ve uttered ourselves what feels like a million times: “Now if it only was 65 degrees and sunny outside…” |
||
11 users like this post: |