|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
29-02-2012, 04:02 PM
|
#1 | ||
|
Regular Member
Join Date: Jun 2007
Posts: 214
|
My AU2 XR6 Ute (VCT) has developed a rough idle and a bad miss just off idel / under load. Clears out fine with a few revs. It is also hard to start when cold.
I have replaced coil, leads and plugs (leads and plugs twice thinking they were faulty) and had the injectors cleaned, to no avail. I am thinking it is the intake manifold gasket, as I have read on here that it is quite common. I have sprayed aerostart all around the intake manifold with the engine idling, but didn't notice any change. Could the gasket still be faulty? Is there a good thread on here showing how to replace the gasket? Is it a big job? Thanks, Mark |
||
|
|
Replacing Intake Manifold Gasket
Threaded Mode