Quote:
Originally Posted by Octane_Flash
I measured up the disc and I have 31.3mm left. I used Blem's idea of the two washers to avoid measuring the lip.
I also found out that I have a DBA rotor instead of the Brembo so the cops must have replaced the front set a while ago. The min thickness written on the disc was 30mm. There is still about 5mm of material on the pads.
So, is there enough meat on the disc for a light machine? There are only light grooves on the face
|
Wait for the pads to be replaced before you machine them i mean you only have about 3mm before replacing them anyway and plus the pads will be worn they shape of the rotor which makes bedding into the machined surface a bit harder to do.