Gday, I dont write much, but do alot of reading, I have a project XE Fairmont in the shed with a scat 393, probe pistons under cast iron
4V closed chambered heads - which are tongued - underneath a matching 3V funnelweb manifold, a predator carby does the mixing, studs top and bottom, main cap girdle fitted - the sump needed modifing for this - C4 tranny fitted to a 4500 street/strip stall, hooked to a - when I get it on the road - fairmont LSD, but not to worry, I have a 9" housing to be slipped in with 4.3 ratio. disks all round.
The engine was balanced so it is able to spin to 7800 - but won't be. ;)
As i have a family and the bank owns my house funds take time to find but it will get finished one day, I have a phase 5 flare kit and wire mags to fit before it goes green.
Bye Frank